Who are we?  Featured Cameras  Articles  Instruction Manuals  Repair Manuals  The Classic Camera Repair Forum  Books  View/Sign Guestbook

Vega 12 (Kiev 6C lens) - the story co... Log in | Log Out | Topics | Search
Moderators | Register | Edit Profile

Classic Camera Repair » Archives-2006 » Vega 12 (Kiev 6C lens) - the story continues! « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Geowelch
Tinkerer
Username: Geowelch

Post Number: 13
Registered: 07-2006

Rating: N/A
Votes: 0 (Vote!)

Posted on Friday, December 22, 2006 - 07:08 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

Some of you may recall my post about Vega 12 80mm lens from a Kiev 6C. (see the thread below for previous history: https://kyp.hauslendale.com/classics/forum/messages/2/8193.html?1166066829)

I dug a little deeper into the Vega 6C, removing the focus ring and helix, which comes off in one unit, after removing three screws around the rear
element.

The aperture blades were completely frozen. Freeing them involved removing and cleaning each blade with Ronsonol, then re-assembling them. Good experience - I now know how apertures work, or how some do anyway.

The diaphragm now opens and closes easily as I turn the ring. Still no response from the button on the rear of the lens mount, which connects to the mirror mechanism in the camera. I've come to the conclusion there is a spring missing from the aperture linkage, but I'm not sure where it should go. The main spring driving the diaphragm blades is working fine. Two possible locations of this hypothetical spring:

1. Just inside the rear cover plate, there is a sub assembly of small levers which transforms rotation of the link shaft to the push-pull of the button. (see first image)

2. There is a collar around the other end of the shaft with a protruding pin which engages against another pin on the arm which opens and closes the aperture. (see second image)

With no spring to provide tension, movement of the arm is not transmitted to the shaft. I've probably over explained my problem, but I was hoping this would sound familiar to someone who has taken apart any Pentacon 6 mount lens. How 'bout you John? ;o)

Image 1:
Inside lens mount, showing linkage and shaft.
Top of pagePrevious messageNext messageBottom of page Link to this message

Geowelch
Tinkerer
Username: Geowelch

Post Number: 14
Registered: 07-2006

Rating: N/A
Votes: 0 (Vote!)

Posted on Friday, December 22, 2006 - 07:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only) Ban Poster IP (Moderator/Admin only)

Here is the second image showing a close-up of the collar and pin. To the left is the other pin, part of the aperture control arm. Please excuse my crude macro photography (8x loupe held against the front of my digital camera).

Rotating collar adjacent to aperture control arm pin.

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions | Program Credits Administration