    
J.Ed Baker
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, March 06, 2005 - 08:50 am: | 
|
I recently acquired an XG-A that has several problems. First, the power switch does not function. Investigation shows that the detent ball is missing, but I don’t know if there are any other parts gone as well. Second, the film advance never stops. If so desired an entire roll could be wound through with out ever tripping the shutter. Third, the top plate is cracked at the right rear corner as if dropped. This may be a contributing factor in the switch problem, but by itself is of the most minor concern.
I purchased this as a possible back-up to my X-700, but I fear I’ve gotten a stylish paperweight. If anyone could share some repair tips or the pertinent pages from the repair manual, I would be most grateful.
J.Ed |
