| Author |
Message |
    
Matt108631
Tinkerer
Username: Matt108631
Post Number: 1
Registered: 03-2010
Rating: N/A
Votes: 0 (Vote!) | | Posted on Thursday, March 25, 2010 - 03:19 pm: | 
|
I have an OM10, and recently i purchased a Winder 2 for it. When i first used it, the shutter mirror instantly broke, not re-setting itself. I took the bottom away, and jiggled around with the small lever arm, and eventually got it working again. However, the shutter speed appears to be the same regardless of mode. I have had it on manual, and automatic, however the speed of the shutter never seems the change? Any help?
Also, has anybody else had this problem and how do i get the Winder to work? The button doesnt work...
Any answer would be much appreciated. |
Leesobing
Tinkerer
Username: Leesobing
Post Number: 51
Registered: 01-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, March 27, 2010 - 01:08 am: |
|
http://vieilalbum.com/documents_fichiers/Manuel%20Olympus%20OM-10.pdf
OM 10 MANAUALS
the shutter speed depend on APERTURE try to change APERTURE to see the shutter speed will change any more you can see the shutter speed will show on viewfinder when change the APERTURE you will see the LED will up or down . |
Rick_oleson
Tinkerer
Username: Rick_oleson
Post Number: 1078
Registered: 07-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, March 28, 2010 - 05:23 pm: |
|
Manual mode just gives you a 1/60 fixed speed unless you have the Manual Adapter plugged into its little socket next to the lens mount.
Sometimes if a winder has sat idle for a long time, the electrical connection between the battery tray and the winder gets dodgy - when I first got my Winder 1 it was very unreliable, and it improved with use (largely this meant removing and reinserting the battery tray) until it was perfect and then stayed that way. |
|
